PiC solution AIRKit Plus Description CE Class IIa Medical Device (EU Reg. 2017/745). Aerosol kit for home use. Comes with a pouch for storing accessories after treatment. Compatible with Pic Solution AIRCube 2 and Kappy Pic Solution piston aerosols. Free from latex and phthalates. How to use Indicated for aerosol therapy treatment. Cleaning and maintenance: Remove the used accessory from the ampoule. Disconnect the connecting tube from the ampoule. Disassemble all ampoule components. Discard any remaining medication. Wash the components in water. Dry by hand or air dry in a clean environment using a soft, clean, lint-free cloth. Assemble the ampoule and store in a dry place. Disinfection procedure: Disinfect the ampoule, mouthpiece, masks, or nosepiece after the last treatment of the day, according to the following procedure. Use a 70% ethyl alcohol solution: Step 1. Soak the components in the disinfectant solution for 10 minutes. Step 2. Remove the components and discard the solution. Step 3. Rinse the components with clean drinking water (60 seconds), shake off excess water and allow to air dry in a clean environment. Components Adult mask: PVC. Child mask: PVC. Fork: Polypropylene. Mouthpiece: Polypropylene. Connecting pipe: PVC. Ampoule: Polypropylene + Polycarbonate. Warnings Do not boil the masks. Never use benzene, thinner, or other flammable chemicals for cleaning. This cleaning procedure has been tested for 365 cleaning cycles. For greater hygiene and safety reasons, never use the same accessories on more than one patient. It is recommended to clean and check the integrity of the accessories before and after each use and replace them if damaged. Conservation Store in a cool, dry place, away from heat sources and sunlight. Shelf life in unopened packaging: 12 months. Format Includes: adult mask, child mask, mouthpiece, nosepiece, air tube, nebulizer kit, and air filters. Code 5803830100000